Kenmore 795 freezer not working? Check the power supply and thermostat settings.

Defrost Thermostat Malfunction

If your Kenmore 795 freezer is not working, one possible cause could be a defrost thermostat malfunction. The defrost thermostat is responsible for regulating the temperature in the freezer and ensuring that it defrosts properly. To check if the defrost thermostat is the issue, you can begin by testing its continuity using a multimeter. Disconnect the power supply before proceeding and locate the thermostat, which is usually found behind the back panel of the freezer. Remove the wires from the thermostat and use the multimeter to test for continuity. If there is no continuity, this indicates a malfunction, and the defrost thermostat should be replaced.

Damaged Fan Motor

If you are experiencing problems with your Kenmore 795 freezer, one possible cause could be a damaged fan motor. To determine if this is the issue, you will need to inspect the fan motor for any signs of damage or obstruction. Look for any visible cracks, breaks, or loose wiring. Additionally, check for any debris or ice buildup that may be obstructing the fan’s rotation. If you notice any damage or obstruction, it is recommended to replace the fan motor. A damaged or obstructed fan motor can prevent proper airflow, leading to poor cooling performance in the freezer. By replacing the fan motor, you can restore optimal functionality and ensure that your Kenmore 795 freezer is working efficiently once again.

Clogged Defrost Drain

If your Kenmore 795 freezer is not working, it could be due to a clogged defrost drain. The defrost drain is responsible for draining water that accumulates during the defrost cycle. When this drain becomes clogged, it can lead to water pooling inside the freezer and causing it to malfunction.

To locate and inspect the defrost drain, you will need to remove the freezer’s back panel. Look for a small opening at the bottom of the panel, which is the defrost drain. Check for any visible clogs or debris that may be obstructing the drain.

To clear the clog in the defrost drain, you can use a turkey baster or a pipe cleaner to gently remove the blockage. Pouring hot water down the drain can also help to melt any ice or debris that may be causing the clog.

After clearing the clog, make sure to reassemble the freezer and monitor its performance. If the issue persists, it is recommended to seek professional assistance to further diagnose and resolve the problem.

Faulty Freezer Temperature Control

In case your Kenmore 795 freezer is not working, one of the possible culprits could be a faulty temperature control. It’s essential to test this component to determine if it needs to be replaced.

Steps to test the freezer temperature control:
1. Ensure that the freezer is plugged in and the power is switched on.
2. Set the temperature control to the desired setting.
3. Use a thermometer to measure the temperature inside the freezer.
4. Wait for approximately 24 hours and check the temperature again.
5. If the temperature does not match the desired setting, the freezer temperature control may be faulty.

If the freezer temperature control is indeed faulty, it is necessary to replace it. Consult the user manual or contact Kenmore customer support for the specific instructions on replacing the temperature control on your model of the Kenmore 795 freezer.

Overloaded Freezer

When your Kenmore 795 freezer is not working properly, one possible cause could be overloading. Assess the contents of your freezer to determine if it is overcrowded. Overfilling the freezer can disrupt the airflow and prevent proper cooling. Remove unnecessary items and organize the remaining ones to create more space. This will allow the cold air to circulate and reach all areas of the freezer more effectively.

Inadequate Power Supply

If you are experiencing issues with your Kenmore 795 freezer not working, inadequate power supply may be the culprit. To diagnose the problem, start by checking the power supply to the freezer. Ensure that the electrical connection is secure and that there are no visible issues. If everything appears to be in order, it is recommended to test alternative power sources or consult a professional for further assistance.

Faulty Compressor

One common reason for a Kenmore 795 freezer not working is a faulty compressor. If you notice any visible damage or leaks on the compressor, it is likely the cause of the issue. The compressor plays a crucial role in the cooling process of the freezer, so it may need to be replaced if it is damaged. To inspect the compressor, unplug the freezer and remove the rear panel. Look for any signs of damage, such as dents or cracks, and check for any oil or refrigerant leaks. If you see any of these indicators, it is advisable to replace the compressor to restore proper functionality to your Kenmore 795 freezer.

Malfunctioning Condenser Coils

If you find that your Kenmore 795 freezer is not working efficiently, one possible cause could be malfunctioning condenser coils. Clean the condenser coils delicately to remove any built-up dirt and debris that may be preventing the freezer from cooling properly. Additionally, carefully inspect the coils for any damage. If you notice any cracks, breaks, or other signs of wear and tear, it may be necessary to replace the coils to restore optimal functioning. Regular maintenance and cleaning of the condenser coils can help prevent future issues and ensure the efficient operation of your Kenmore 795 freezer.

Inaccurate Temperature Setting

If your Kenmore 795 freezer is not working properly, one possible reason could be an inaccurate temperature setting. It is important to adjust the temperature setting on the freezer to ensure it reaches the desired temperature. To do this, refer to the user manual for instructions on how to access the temperature controls. Once you have access, you can adjust the temperature using the designated knobs or buttons. Keep in mind that it may take some time for the freezer to reach the new temperature setting, so be patient and monitor the freezer periodically to ensure it is cooling properly.

Kenmore 795 Freezer Not Working: Troubleshooting Tips for Quick Fix


Defective Door Seal

If your Kenmore 795 freezer is not working properly, one of the potential causes could be a defective door seal. The door seal is responsible for maintaining the cold temperature inside the freezer and if it is damaged or worn out, it can result in improper sealing.

To troubleshoot this issue, carefully examine the door seal for any signs of damage or wear. Check for any cracks, tears, or loose sections in the seal. If you notice any issues, it is recommended to replace the door seal to ensure proper sealing of the freezer.

Power Outage Or Tripped Circuit Breaker

If your Kenmore 795 freezer is not working, the first thing you should investigate is whether there was a power outage or if the circuit breaker was tripped. Power outages can disrupt the functioning of electrical appliances, including freezers. Check the power supply in your home and see if the circuit breaker needs to be reset. Sometimes, power outages can reset the circuit breaker, so addressing the power outage may solve the issue. Reset the circuit breaker if necessary or wait for the power to be restored to your home. Once power is restored, check if the freezer starts working again. If the problem persists, you may need to consider other potential causes for the freezer not working.

Frequently Asked Questions Of Kenmore 795 Freezer Not Working

Why Is My Kenmore 795 Freezer Not Cooling Properly?

If your Kenmore 795 freezer is not cooling properly, it could be due to a variety of reasons. Check if the condenser coils are dirty, the temperature settings are correct, or if there is a problem with the compressor. Additionally, ensure that the freezer door is properly sealed to prevent air leaks.

How To Troubleshoot A Kenmore 795 Freezer That Is Not Working?

To troubleshoot a Kenmore 795 freezer that is not working, start by checking the power supply and making sure it is plugged in properly. Verify if the circuit breaker hasn’t tripped and if the freezer temperature settings are correct. If the issue persists, contact a professional technician for further assistance.

What Should I Do If My Kenmore 795 Freezer Is Not Freezing?

If your Kenmore 795 freezer is not freezing, there are a few steps you can take. First, make sure the freezer temperature is set correctly. Check if the freezer is overcrowded or if the air vents are blocked. If these measures don’t work, it might be time to call a professional to diagnose and fix the issue.


Troubleshooting a Kenmore 795 freezer not working can be a daunting task, but with the right knowledge, it can be resolved efficiently. By checking common issues such as power supply, temperature control settings, and defrost timer, one can often identify and fix the problem.

If the issue persists, consulting a professional technician is advised for thorough diagnostic and repairs. Resolving freezer malfunctions will ensure your food stays fresh and save you from unnecessary expenses.

Rate this post

Leave a Reply

Your email address will not be published. Required fields are marked *