To remove a Whirlpool bottom freezer drawer, follow these steps: First, empty the drawer of all items. Next, locate the stoppers on each side of the drawer and push them in to release the drawer from the tracks.

Lastly, carefully lift the drawer out and set it aside. Removing a Whirlpool bottom freezer drawer is a simple process that allows for easy cleaning and maintenance. Ensure the drawer is empty before proceeding and take caution to avoid any damage to the tracks or the drawer itself.

Follow these steps to safely remove the drawer from your Whirlpool bottom freezer.

Table of Contents

Tools And Materials Needed

To remove the Whirlpool bottom freezer drawer, you will need a screwdriver, a pry tool, and a soft cloth for protection. These tools will help you dismantle the drawer safely and efficiently.


One of the essential tools you’ll need to remove your Whirlpool bottom freezer drawer is a screwdriver. A screwdriver allows you to loosen and remove any screws or fasteners holding the drawer in place. It’s important to choose the right type and size of screwdriver based on the screws used in your particular Whirlpool model.


Having a pair of pliers handy will make the process of removing the bottom freezer drawer much easier. Pliers are useful for gripping and turning objects with a firm grip, which can be particularly helpful if there are any stubborn or hard-to-reach screws or fasteners. They provide the extra leverage needed to loosen and remove these components effectively.

Container For Storage

Before you begin removing the bottom freezer drawer, ensure you have a container or bucket nearby for storage. This container will be used to keep any small screws, bolts, or other hardware safe and organized during the disassembly process, preventing them from getting lost or misplaced. By keeping all the components in one place, you’ll have an easier time when it comes to reassembling everything later.

Replacement Parts (if Necessary)

If you suspect that any parts of your bottom freezer drawer are damaged or worn out, it’s advisable to have replacement parts on hand before starting the removal process. This can save you time and effort in the long run. It’s essential to ensure that you have the correct replacement parts specific to your Whirlpool model. This way, you can easily swap out any faulty components during reassembly, restoring your bottom freezer to optimal working condition.

Safety Precautions

When attempting to remove the bottom freezer drawer of your Whirlpool refrigerator, it’s important to prioritize safety. By following a few simple precautions, you can ensure that the process goes smoothly and minimize the risk of accidents or injuries. Here are the safety precautions you should keep in mind:

H3unplug The Refrigerator/h3

Before starting any work on your refrigerator, it is essential to unplug it from the power source. This will eliminate the risk of electric shock and prevent any potential damage to the appliance. Locate the power cord at the back of the refrigerator and firmly unplug it from the socket.

H3wear Protective Gloves/h3

Once the refrigerator is unplugged, it’s important to protect your hands by wearing a pair of sturdy protective gloves. This will provide a layer of insulation and prevent any injury from sharp edges or potential accidents while handling heavy items. Ensure the gloves fit securely and provide adequate dexterity for the task at hand.

H3use Caution When Handling Heavy Objects/h3

During the process of removing the bottom freezer drawer, you may encounter heavy components or objects that require lifting. It is crucial to exercise caution and use proper lifting techniques to avoid strain or injury. Bend your knees, keep your back straight, and use your leg muscles to lift heavy objects. If necessary, ask for assistance to distribute the weight and reduce the risk of accidents.

By adhering to these safety precautions, you are taking the necessary steps to ensure your well-being while removing the bottom freezer drawer of your Whirlpool refrigerator. Safety should always be the number one priority when dealing with heavy appliances, so remember to unplug the refrigerator, wear protective gloves, and exercise caution when handling heavy objects. Now let’s move on to the step-by-step guide on how to remove the Whirlpool bottom freezer drawer.

Step 1: Emptying The Freezer Drawer

To remove the Whirlpool bottom freezer drawer, start by emptying the freezer completely. Ensure all items have been removed and the drawer is free from any stored items before moving on to the next step. This process allows for easy access and prevents any damage while removing the drawer.

Remove All Items From The Freezer Drawer

If you own a Whirlpool bottom freezer, you know how important it is to keep it clean and organized. One essential step in the process is removing the freezer drawer. Whether you need to clean or repair the drawer, this guide will take you through each step.

Transfer Perishable Items To Another Freezer Or Cooler

Before you start removing the freezer drawer, it’s crucial to ensure that all perishable items are safely transferred to another freezer or cooler. This will help prevent any food from spoiling during the process. Properly handling these items is key to maintaining their freshness and quality.

Steps to transfer perishable items:

  1. Gather all the necessary supplies, including a cooler or another freezer.
  2. Categorize the items based on their type or expiration date to make the organization easier.
  3. Remove each item from the freezer drawer, keeping them in proper storage containers or packaging.
  4. Transfer the items to the cooler or another freezer, ensuring they are placed in an organized manner.
  5. Make sure the temperature in the temporary storage area is suitable for maintaining the freshness of the perishable items.

By following these steps, you can ensure that your perishable items are safely stored and ready to be transferred back into the freezer drawer once the maintenance or cleaning is complete. Now that you’ve taken care of the perishable items, it’s time to move on to removing the freezer drawer itself.

Step 2: Removing The Freezer Baskets

Removing the freezer baskets is an essential step to access the bottom freezer drawer of your Whirlpool refrigerator. In this step, we will guide you through the process of taking out the top and middle baskets from your freezer.

H3take Out The Top Basket By Lifting It And Pulling It Toward You/h3

The top basket is the first one you need to remove. By following these simple instructions, you can do it effortlessly:

  1. Open the freezer drawer completely.
  2. Locate the top basket inside the freezer.
  3. Boldly grab the sides of the basket with both hands.
  4. Lift the basket upwards, applying steady pressure.
  5. While lifting, make sure to tilt the basket toward you.
  6. Continue lifting until the basket clears the top rail.
  7. With the basket tilted towards you, pull it out of the freezer.

H3remove The Middle Basket In The Same Manner/h3

After successfully removing the top basket, you are now ready to remove the middle one. Follow these straightforward steps:

  1. Locate the middle basket, just below the top basket.
  2. Grasp the sides of the basket firmly.
  3. Apply upward pressure to lift the basket.
  4. Tilt the basket towards you while lifting.
  5. Continue lifting until the basket clears the top rail.
  6. With the basket tilted towards you, pull it out of the freezer.

By following these easy steps, you can remove both the top and middle baskets from your Whirlpool bottom freezer. Now that you have successfully completed this step, you can move on to the next step in accessing and removing the bottom freezer drawer.

Step 3: Removing The Freezer Drawer Front Panel

Once you have successfully removed the items from the freezer drawer and taken out the freezer drawer itself, it’s time to move on to the next step – removing the front panel of the drawer. This step is crucial as it allows you to access the inner workings of the freezer and perform any necessary repairs or maintenance.

Locate The Screws Securing The Front Panel To The Drawer

Before you begin, you need to locate the screws that are securing the front panel to the freezer drawer. These screws are usually located on the inside of the drawer, near the edges of the panel. Take a close look at the sides and bottom of the front panel to spot these screws.

Use A Screwdriver To Unscrew And Remove Them

Once you’ve located the screws, it’s time to grab your trusty screwdriver and start unscrewing them. Make sure to use a screwdriver that fits the size of the screws perfectly to avoid damaging them. Start by turning the screwdriver counterclockwise to loosen the screws, and then remove them completely.

Note: Keep the screws in a safe place, so you don’t lose them. These screws will be needed for reattaching the front panel later on.

After removing all the screws, you can now gently pull the front panel away from the freezer drawer. Take your time to ensure you don’t apply too much force and risk damaging the panel or any of the components inside.

Congratulations! You’ve successfully completed step 3 of removing the Whirlpool bottom freezer drawer. With the front panel removed, you’ll soon be able to perform any necessary repairs or cleaning to keep your freezer running smoothly.

Step 4: Detaching The Drawer From The Slides

After removing the items and accessories from your Whirlpool bottom freezer drawer, it’s time to detach the drawer from the slides. This step might seem a bit tricky, but don’t worry, we’ve got you covered. Just follow these simple instructions:

Pull The Drawer Straight Out Until It Stops

To begin detaching the drawer, start by pulling it straight out as much as it allows. Be sure to do this smoothly and steadily, without jerking movements. The drawer will slide along the tracks until it reaches its maximum extension.

Lift The Front Of The Drawer Slightly

Once the drawer is fully extended, you’ll need to lift the front part slightly upwards. Grip the front of the drawer firmly with both hands, and using a swift and controlled motion, lift it up by a few inches. This slight elevation will help disengage the hooks or levers securing the front of the drawer to the slides.

Lift The Back Of The Drawer Off The Slides

With the front of the drawer raised, it’s time to lift the back section off the slides. While keeping the front elevated, grip the sides or back of the drawer and tilt it upwards. As you do so, make sure that each side of the drawer disengages from the slides smoothly.

Once both sides have cleared the slides, gently lower the front of the drawer while keeping the back slightly elevated. This will allow you to completely detach the drawer from the freezer unit. Now you’re ready to move on to the next steps in your Whirlpool bottom freezer maintenance or repair process.

With these straightforward instructions, you can easily remove the drawer from your Whirlpool bottom freezer. Remember to handle the drawer with care to avoid any damage or mishaps. Now that you’ve successfully completed this step, you’re one step closer to resolving any issues or performing routine maintenance on your appliance.

Step 5: Disconnecting Water And Electrical Connections (if Applicable)

Disconnecting water and electrical connections is an important step when removing the Whirlpool bottom freezer drawer. Ensure safety by detaching these connections carefully before proceeding.

If Your Freezer Has A Water Line Or Electrical Connections, Disconnect Them Carefully

In step 5 of removing your Whirlpool bottom freezer drawer, you may need to tackle the task of disconnecting any water line or electrical connections that your appliance might have. This is an essential step to ensure a safe and hassle-free removal process.

Follow The Manufacturer’s Instructions For Disconnecting These Components

When it comes to disassembling any appliance, it’s crucial to adhere to the manufacturer’s guidelines. This includes disconnecting water lines and electrical connections safely and correctly. Make sure you have the manufacturer’s instructions handy, as they will provide detailed steps specific to your Whirlpool bottom freezer model.

To disconnect the water line, follow these steps:

  1. Locate the water shut-off valve, typically located either behind the appliance or under the sink.
  2. Turn off the water supply by twisting the shut-off valve clockwise until it is fully closed.
  3. If your water line is connected with a coupling, use a wrench to loosen the coupling and disconnect the water line.
  4. If your water line is connected with a push-to-connect fitting, press the release ring and firmly pull the water line to detach it.
  5. Place a towel or bucket underneath the disconnected end of the water line to catch any remaining water.

To disconnect the electrical connections, follow these steps:

  1. Ensure the power is turned off by either unplugging the appliance or switching off the circuit breaker dedicated to the freezer.
  2. Inspect the electrical connections and identify any plugs or wires that need to be disconnected.
  3. If there are plugs, gently pull them apart by gripping the plug housing and firmly pulling straight out.
  4. If there are wire connections, carefully loosen any screws or connectors holding them in place, and then separate the wires.
  5. Secure any loose wires with electrical tape to prevent them from accidentally touching other components or causing damage.

Remember, the specific steps may vary depending on the Whirlpool model you own. Always consult the manufacturer’s instructions for accurate and model-specific guidance.

How to Remove Whirlpool Bottom Freezer Drawer


Step 6: Removing The Drawer From The Freezer

To remove the Whirlpool bottom freezer drawer, follow these steps. Start by emptying the drawer and pulling it out gently. Then, lift the front of the drawer and pull it out completely.

Lift The Drawer Out Of The Freezer Opening

Now that you have successfully removed the screws and the drawer slides, it’s time to lift the drawer out of the freezer opening. This step requires a bit of strength and finesse, but with the right technique, it can be easily done.

Firstly, make sure you have a sturdy grip on both sides of the drawer. It’s important to lift it evenly to avoid any mishaps. Take a deep breath, focus, and let’s proceed to the next step.

Place It On A Sturdy Surface Or In A Container For Safekeeping

Once you have successfully lifted the drawer out of the freezer, it’s crucial to place it on a sturdy surface or in a container for safekeeping. You don’t want it to accidentally get damaged or cause any injuries.

If you choose to place it on a sturdy surface, make sure it’s clean and free from any sharp objects that could potentially scratch or crack the drawer. Alternatively, you can use a container or a large plastic bag to store the drawer temporarily. This will help protect it from any dust or debris as you complete the rest of the cleaning or maintenance tasks.

Remember, proper storage is essential to ensure the longevity of your Whirlpool bottom freezer drawer.

With the drawer safely stored, you’re one step closer to completing the process of removing and cleaning your Whirlpool bottom freezer drawer. By following the easy steps and using caution throughout, you’ll be able to effectively maintain and troubleshoot any issues that may arise.

Step 7: Reinstalling The Freezer Drawer (optional)

The final step in removing the Whirlpool bottom freezer drawer is reinstalling it, which is optional depending on your specific situation. If you needed to remove the drawer for cleaning or maintenance purposes, now is the time to put it back in its place. Follow the simple steps below to ensure a proper reinstallation.

Follow The Reverse Steps To Reinstall The Drawer

To reinstall the Whirlpool bottom freezer drawer, you need to reverse the steps you followed while removing it. Begin by sliding the drawer back into the freezer compartment, ensuring it aligns properly with the tracks. Apply gentle pressure to push it all the way in until it locks securely in place.

Make Sure All Connections Are Secure And The Front Panel Is Properly Attached

Once the drawer is back in position, it’s crucial to double-check that all connections are secure. This includes ensuring the water supply line, if applicable, is properly connected. Verify the drawer’s front panel is securely in place and aligned correctly with the rest of the freezer unit.

If any connections or attachments appear loose or misaligned, take the time to adjust and secure them before considering the reinstallation process complete. This will help prevent any potential issues or malfunctions down the line.

By following these simple steps and ensuring everything is properly connected, you can successfully reinstall the Whirlpool bottom freezer drawer. Take your time and pay attention to the details, and you’ll have your freezer up and running again in no time.

Frequently Asked Questions For How To Remove Whirlpool Bottom Freezer Drawer

Can I Take The Drawers Out Of My Freezer?

Yes, you can remove the drawers from your freezer.

How Do You Defrost A Whirlpool Bottom Freezer?

To defrost a Whirlpool bottom freezer, follow these steps: 1. Remove all food items from the freezer and store them in a cooler or another freezer. 2. Unplug the freezer from the power source. 3. Leave the freezer door open and allow the ice to melt naturally.

You can place towels or a shallow pan to collect the water. 4. Once the ice has melted, wipe down the interior with a clean, damp cloth. 5. Plug the freezer back in and wait until it reaches the desired temperature before returning the food items.

How Do I Remove The Bottom Freezer Drawer From My Whirlpool Refrigerator?

To remove the bottom freezer drawer from your Whirlpool refrigerator, first, empty the drawer and remove any items obstructing it. Next, lift the front of the drawer slightly, then pull it out towards you. Be careful not to force it, as some models may have additional locking mechanisms that need to be released before the drawer can be fully removed.

What Tools Do I Need To Remove The Whirlpool Bottom Freezer Drawer?

To remove the Whirlpool bottom freezer drawer, you will need a flathead screwdriver or a putty knife. This tool will help you release any locking mechanisms or clips that may be holding the drawer in place. Additionally, having a clean cloth or towel on hand can be helpful to protect the surfaces of your refrigerator and drawer during the removal process.


To summarise, removing the Whirlpool bottom freezer drawer is a straightforward process that can be done by following a few simple steps. By properly disconnecting the water supply, removing the freezer baskets, and releasing the drawer from its tracks, you can easily access and clean the freezer compartment as needed.

Remember to take caution and refer to the manufacturer’s manual for specific instructions. With these helpful tips, you can efficiently maintain and keep your Whirlpool bottom freezer in top condition.

Rate this post

Leave a Reply

Your email address will not be published. Required fields are marked *